Carevel Hospital Trolley

Product Details:

• Frame structure is made of CRCA Tubes
• Mild steel tubular framework mounted on four swivel Heavy Duty castors, 150 mm (6”) diameter two with brakes & two without brakes
• Removable stretcher top in two section made of pre-laminated board supported on tubular frame 
• Provided with Backrest on ratchet
• Provided with SS Swing Down type Safety side rails
• Oxygen cylinder cage & M.S. storage tray
• Stainless steel IV Pole with provision on diagonal sides
• Pre-treated and powder coated finish

Product Details:

• Made up of CRCA pipes mounted on 50 mm castors.
• Provided with SS Tray.
• Height adjustable by Gear Mechanism.

Product Details:

• Framework is made up of CRCA Tubes mounted on 100 mm castors.
• Height adjustable by gear provided on either side.

Product Details:

• Made up of SS tubes mounted on 100 mm castors.
• Two SS shelves top (307X18”) with 3 side railing and bottom with 4 side railing.
• Bowl and bucket holding cage on one side with SS bowl and bucket.

Product Details:

• Framework is made up of CRCA tubes mounted on 100 mm castors.
• Two SS shelves with three sides railing on top self and 4 side railing in lower self.
• Two drawers under each self.
• All metal components are pretreated and epoxy powder coated.
• Mounted on 100mm dia diagonal locking wheels.

Product Details:

• Framework is made up of CRCA tubes and Sheets.
• Provided with six drawers of different sizes.
• Provided with PVC Drug Holders in the first two drawers.
• Provided with two rows of PVC containers at the top of the Cart.
• Provided with Push Handle one side.
• Provided with S.S. Push Shelve with safety railings.
• Provided with Corner buffer.
• The cart is mounted on 125 mm dia twin wheel castors with diagonal brakes.
• All metal component is pretreated and Epoxy Powder Coated.

Product Details:

• Made up of CRCA sheet with four shelves and one drawer.
• Mounted on 100 mm dia castors two with break.
• Trolley has socket to receive 5/15 Amp — 230V A/C 3 pin plugs. Two inputs each with safety fuse and switch.
• Trolley has two handles for ease of relocation.
• All metal components are pretreated and epoxy powder coated.

Product Details:

• Frame Structure is made of CRCA Tubes and Sheets.
• Trolley mounted on 125 mm Castor Wheel with Diagonally Locking Mechanism.
• Provided with IV Pole.
• Provided with Polymer Molded Swing Down Type Safety Side Railings which provides aesthetic Looks.
• Backrest can be adjusted up to 70 Degrees via Pneumatic Pumps.
• Height Adjustment can be achieved via linear super smooth crank mechanism.

Product Details:

• Frame structure is made of CRCA Tubes
• Mild steel tubular framework mounted on four swivel Heavy Duty castors, 150 mm (6”)
• Diameter two with brakes & two without brakes
• Removable stretcher top made of CRCA Sheet.
• Pre-treated and powder coated finish

Product Details:

• Made up of CRCA pipes mounted.
• Pretreated and epoxy powder coated.
• For D type cylinder mounted on 100mm castors.
• Dimension:
• For B type cylinder mounted on 150mm castors.
• Dimension:
• All metal component is pretreated and epoxy powder coated.
• Also available in Complete Stainless-Steel.

Product Details:

• Framework is made up of CRCA tubes.
• Provided with Four Polystyrene Boxes each with three lockable drawers.
• Provided with Push Handle one side.
• Provided with S.S Shelve with raised edges.
• Provided with 125 mm Corner buffer.
• The cart is mounted on 125 mm dia castors with diagonal brakes.

Product Details:

• Frame structure is made of CRCA Tubes.
• Provided with Two section top with removable X-ray permeable stretcher with dimensions 1830 mm L X 560 mm W
• Height adjustment, Trendelenburg & Reverse Trendelenburg positions can be achieved by linear crank mechanism at the foot end.
• Provided with backrest on ratchet.
• Provided with Buffers at four corners
• Provided with Four 125 mm (5”) diameter high grade synthetic body castors with, two with brakes and two without brakes
• Provided with Synthetic rubber covered push-pull handle on either side.
• Provided with Sliding X-Ray cassette holder throughout the length of the trolley.
• Stainless steel telescopic | V pole along with provision at four positions
• The complete metal components are pretreated and epoxy powder coated.
• Provided with Swing - down type stainless steel side rails
• Provided with Oxygen cylinder holder and SS IV stand.

Product Details:

• Frame structure is made of CRCA Tubes.
• Provided with Two section top with removable X-ray permeable stretcher with dimensions 1830 mm L X 560 mm W.
• Gas spring assisted Trendelenburg & Reverse Trendelenburg positions.
• Height adjustment by foot operated high-quality hydraulic pump.
• Provided with backrest on ratchet.
• Provided with Buffers at four corners
• Provided with Four 125 mm (5”) diameter high grade synthetic body castors with, two with brakes and two without brakes
• Provided with Synthetic rubber covered push-pull handle on either side.
• Provided with Sliding X-Ray cassette holder throughout the length of the trolley.
• Stainless steel telescopic IV pole along with provision at four positions
• The complete metal components are pretreated and epoxy powder coated.
• Provided with Swing - down type stainless steel side rails
• Provided with Oxygen cylinder holder and SS IV stand.

Product Details:

• Framework is made up of CRCA tubes and sheets. 
• Provided with two drawers with handles different sizes. 
• Provided with S.S. Top 
• Provided with one bottom shelve & three side railing 
• Provided with wooden writing board 
• The trolley is mounted on 100mm dia single wheel castors with diagonal brakes. 
• All metal component is pretreated and epoxy powder coated 

Product Details:

• Frame Structure is made up of CRCA Tubes.
• Heavy duty non-staining, precision ball bearing swivel castors of 200 mm diameter with high-grade synthetic body for easy maneuverability.
• Provision of 5th castor for 360 degree rotation
• Foot operated and centrally actuated lever at head and foot ends with multistage switching for total lock, direction lock or free mobility
• Gas spring assisted seamless adjustment of Backrest.
• Knee Rest can be adjusted via Crank Mechanism as well as Rachet Mechanism.
• Convenient Height adjustment, Trendelenburg and Reverse Trendelenburg Positions can be achieved via high quality Dual Column hydraulic pump with foot operated levers on either side of the trolley.
• Four section mattress platform made of X-Ray permeable Pre-laminated Board, Supported on Strong Tubular Frame with removable stretcher
• Sliding X-Ray cassette holder throughout the length of the trolley.
• Fully collapsible and individually operated safety side railings.
• Push pull handles on either side with rubber grippers.
• Provision of mounting heavy-duty IV pole at four locations
• Safety rubber buffer at four Corners
• Ample storage space
• Rexene covered two section PU foam mattress; 50 mm thick
• Dust Protective Base Cover with Oxygen Cylinder Holder.

Product Details:

• Made up of SS pipes and sheets mounted on 100 mm castors.
• Two SS shelves, top self with 3 side railing and lower self with 4 side railing.

Product Details: